Xact air machines1/13/2023 ![]() If this is happening on your air compressor, get the pump serviced. While not necessarily dangerous, a compressor that never reaches cut out and runs on will prematurely wear the motor. This could be because of a mechanical failure of some sort in the pump. So what if my air compressor does not stop? If the pressure in the compressor tank does not get to the cut out pressure setting, the compressor will continue to run. ![]() When the pressure switch senses that the pressure in the tank has reached the cut out pressure level, the pressure switch trips to off, and the compressor stops. When the pressure in your compressor tank drops to the cut in pressure setting, the air compressor should start, and pump air into the tank, raising the pressure in the tank. The switch will have a low pressure cut in setting and a higher pressure cut out setting. Regardless of the type of switch, they all work in a similar fashion. Your air compressor may not have a visible pressure switch at all, but may have an internal one, much like the one in the image following. Your air compressor pressure switch may look like this one or it might be similar, but be made by LeFoo, or one of the many other manufacturers of air compressor pressure switches. This particular pressure switch works within the 40 – 175 PSI range and you can get it on Amazon here. In the photo above you can see a typical compressor switch. The answer is, typically yes, with some exceptions as noted below.Īll air compressors shut off automatically if they have a functioning compressor pressure switch that is installed on the air compressor to shut it down when the pressure reaches a certain level.ĬONDOR 11KC2E Pressure Swtch, Dpst, 40 to 175 Psi, Stndrd ![]() Do all air compressors shut off automatically? A good question that came in from a visitor recently.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |